Alarm Clock with Light Indicator
• Self-contained power supply: battery, size 6F22 (Krona)
External power supply: DC Jack 5.5×2.1 mm (~12V 500 mА 50Hz)
• Number of addresses of the device required to rule out false alarm – 1
• Signal reception range: ≥ 2m
Operation principle: when the signal is received, the light/vibration/sound indication is actuated.
Getting ready for use:
1. Unpack the desktop signaler with light/vibration/sound indication and alarm clock function.
2. Open the battery door.
3. Insert the battery (size 6F22). The battery is necessary to save the clock settings when the adapter is disconnected from the mains.
4. Connect the wired vibrating pad.
5. Connect the signaler to the telephone line (if necessary).
6. Connect the AC adapter (12V 500mА 50Hz) to the signaler and the mains.
7. Set the clock.
8. Set the alarm time.
9. Set the preferable operating mode using the Mode switch.
10. Select the brightness level using the dimmer.
11. Adjust the volume with Volume control.
12. Select the preferable backlight level.
13. Adjust the frequency/tone of the sound signal with Tone control.
14. Connect the auxiliary devices to corresponding connectors 1-4 (if necessary).
To complete step 7, proceed as follows:
- Press and hold Set clock button;
- Press or press and hold Hour or Min buttons until you see the correct hour and minutes on display;
- Release Set clock button.
- To complete step 8, proceed as follows:
- Press and hold Set alarm button;
- Press or press and hold Hour or Min buttons until you see the correct hour and minutes on display;
- Release Set alarm button.
It is recommended that the desktop signaler with light/vibration/sound indication and alarm clock function be used with Vibratel telephone.